ASTM F2095

ASTM F2095
Test Methods for Pressure Decay Leak Test for Flexible Packages With and Without Restraining Plates
solicitar um orçamento

Introduction to ASTM F2095 and Its Importance

In the packaging industry, maintaining the integrity of flexible packages is essential for product protection and compliance. ASTM F2095 provides a standardized approach to detect leaks in flexible packaging using pressure decay methods. This test ensures that packaging—especially in sectors like food, medical, and pharmaceuticals—meets stringent safety and quality expectations.

Pressure Decay Tester and Its Role in ASTM F2095

A key component of ASTM F2095 is the use of a pressure decay tester. This instrument measures the internal pressure loss in a sealed flexible package over time. A loss of pressure indicates a potential leak in the packaging material or seal. The pressure decay method is valued for its sensitivity and non-destructive nature, making it ideal for high-risk applications such as food packaging leak detection and sterile medical product validation.

O LSST-01 Testador de resistência a vazamentos e selagem by Instrumentos de Célula is specifically designed for these applications. It provides precise pressurization, time-controlled testing, and reliable data recording, aligning perfectly with the procedural requirements of ASTM F2095.

Sistema de teste de vazamento e resistência de vedação LSST-01
ASTM F2095 Pressure Decay Method

Understanding ASTM F2095 Test Methods

Test Method A: Without Restraining Plates

This method is typically used when the package can naturally expand under pressure. It includes the following steps:

  • Pressurize the package to a preset value.
  • Stabilize the internal pressure.
  • Measure pressure decay over a fixed duration.
  • Determine leak presence based on the pressure drop.

This approach is ideal for assessing packaging where internal volume variations can occur, such as flexible food packaging or resealable pouches.

ASTM F2095 Leak Test Method A
LSST-01 Testador de resistência de vazamento e vedação com placas de contenção
ASTM F2095 Leak Test Method B

Test Method B: With Restraining Plates

In scenarios where package expansion must be minimized to maintain consistent volume during testing, rigid restraining plates are used. This method is especially suitable for porous or irregularly shaped packages. The plates ensure that the test measures only pressure decay due to leaks, not due to volume fluctuations.

For both methods, the sample must be properly conditioned to match the testing environment—typically at 23 ± 2°C and 50 ± 5% RH—to avoid pressure fluctuations due to temperature differences.

Apparatus Requirements for ASTM F2095

To ensure compliance with ASTM F2095, your test system should include:

O Cell Instruments LSST-01 meets these requirements and offers user-friendly operation with automated cycles, reducing human error and increasing repeatability.

Applications in Food Packaging Leak Detection

In food packaging leak detection, ensuring seal integrity directly impacts product shelf life and consumer safety. ASTM F2095 enables manufacturers to verify package integrity without destroying the product. The LSST-01 offers critical support in identifying packaging defects before distribution, thus helping brands maintain trust and regulatory compliance.

Furthermore, flexible packaging used in frozen food, ready meals, or modified atmosphere packaging (MAP) greatly benefits from pressure decay testing, as even micro-leaks can compromise quality.

FAQ about ASTM F2095

Flexible packages with or without contents, including food pouches, medical wraps, and pharmaceutical blister packs.

It detects leaks as small as 1 × 10⁻⁴ sccs, depending on the instrument and method used.

No, only if volume consistency is critical or the package is porous. Method A does not use plates; Method B does.

It automates pressurization, stabilization, and pressure decay measurement, ensuring compliance and ease of use.

Yes, especially in quality control for vacuum-sealed or MAP flexible food packaging.

Looking for reliable ASTM F2095 leak detection equipment?

Não perca a oportunidade de otimizar seus processos de controle de qualidade com equipamentos de última geração.

Contate-nos

Informações relacionadas

Norma ASTM F2054

Método de teste padrão ASTM F2054 para teste de ruptura de selos de embalagens flexíveis usando pressurização de ar interna em placas de contenção solicitação

Ler mais

Norma ASTM F1140

Testes de pressurização ASTM F1140 para embalagens Solicite um orçamento Resumo da norma Métodos de teste padrão ASTM F1140/F1140M-13(2020) para falha de pressurização interna

Ler mais

ASTM D3078

ASTM D3078 Visão geral abrangente de – O método de teste de vazamento de embalagem mais usado Solicite um orçamento Resumo padrão ASTM D3078,

Ler mais

Norma ASTM F2338

ASTM F2338 Método de teste de vazamento de decaimento de vácuo não destrutivo solicite um orçamento Resumo do padrão Método de teste padrão ASTM F2338 para teste não destrutivo

Ler mais

Norma ASTM F2096

Norma de teste de vazamento ASTM F2096: Teste de vazamento de bolhas Teoria do teste e visão geral do processo O teste ASTM F2096 é projetado para

Ler mais

Testador de resistência de vazamento e vedação

O LSST-03 Leak and Seal Strength Tester é um dispositivo de última geração projetado para avaliação rigorosa da integridade do selo de embalagens em vários setores. Este equipamento é crucial para verificar se a embalagem mantém suas capacidades de proteção, salvaguardando assim a qualidade e a segurança do produto. Ele é particularmente adequado para aplicações que envolvem embalagens flexíveis, mas também é adaptável para testar materiais rígidos e não flexíveis por meio de seu design personalizável.

Ler mais