ASTM F2095

ASTM F2095
Test Methods for Pressure Decay Leak Test for Flexible Packages With and Without Restraining Plates
견적 요청

Introduction to ASTM F2095 and Its Importance

In the packaging industry, maintaining the integrity of flexible packages is essential for product protection and compliance. ASTM F2095 provides a standardized approach to detect leaks in flexible packaging using pressure decay methods. This test ensures that packaging—especially in sectors like food, medical, and pharmaceuticals—meets stringent safety and quality expectations.

Pressure Decay Tester and Its Role in ASTM F2095

A key component of ASTM F2095 is the use of a pressure decay tester. This instrument measures the internal pressure loss in a sealed flexible package over time. A loss of pressure indicates a potential leak in the packaging material or seal. The pressure decay method is valued for its sensitivity and non-destructive nature, making it ideal for high-risk applications such as food packaging leak detection and sterile medical product validation.

그만큼 LSST-01 누출 및 밀봉 강도 테스터 by 셀 인스트루먼트 is specifically designed for these applications. It provides precise pressurization, time-controlled testing, and reliable data recording, aligning perfectly with the procedural requirements of ASTM F2095.

LSST-01 누출 및 밀봉 강도 시험기 시스템
ASTM F2095 Pressure Decay Method

Understanding ASTM F2095 Test Methods

Test Method A: Without Restraining Plates

This method is typically used when the package can naturally expand under pressure. It includes the following steps:

  • Pressurize the package to a preset value.
  • Stabilize the internal pressure.
  • Measure pressure decay over a fixed duration.
  • Determine leak presence based on the pressure drop.

This approach is ideal for assessing packaging where internal volume variations can occur, such as flexible food packaging or resealable pouches.

ASTM F2095 Leak Test Method A
LSST-01 누출 및 밀봉 강도 테스터, 제한 플레이트 포함
ASTM F2095 Leak Test Method B

Test Method B: With Restraining Plates

In scenarios where package expansion must be minimized to maintain consistent volume during testing, rigid restraining plates are used. This method is especially suitable for porous or irregularly shaped packages. The plates ensure that the test measures only pressure decay due to leaks, not due to volume fluctuations.

For both methods, the sample must be properly conditioned to match the testing environment—typically at 23 ± 2°C and 50 ± 5% RH—to avoid pressure fluctuations due to temperature differences.

Apparatus Requirements for ASTM F2095

To ensure compliance with ASTM F2095, your test system should include:

그만큼 Cell Instruments LSST-01 meets these requirements and offers user-friendly operation with automated cycles, reducing human error and increasing repeatability.

Applications in Food Packaging Leak Detection

In food packaging leak detection, ensuring seal integrity directly impacts product shelf life and consumer safety. ASTM F2095 enables manufacturers to verify package integrity without destroying the product. The LSST-01 offers critical support in identifying packaging defects before distribution, thus helping brands maintain trust and regulatory compliance.

Furthermore, flexible packaging used in frozen food, ready meals, or modified atmosphere packaging (MAP) greatly benefits from pressure decay testing, as even micro-leaks can compromise quality.

FAQ about ASTM F2095

Flexible packages with or without contents, including food pouches, medical wraps, and pharmaceutical blister packs.

It detects leaks as small as 1 × 10⁻⁴ sccs, depending on the instrument and method used.

No, only if volume consistency is critical or the package is porous. Method A does not use plates; Method B does.

It automates pressurization, stabilization, and pressure decay measurement, ensuring compliance and ease of use.

Yes, especially in quality control for vacuum-sealed or MAP flexible food packaging.

Looking for reliable ASTM F2095 leak detection equipment?

최첨단 장비로 품질 관리 프로세스를 최적화할 수 있는 기회를 놓치지 마세요.

문의하기

관련 정보

ASTM F2054

ASTM F2054 제한 플레이트 내부 공기 가압을 사용한 유연 패키지 씰의 파열 테스트를 위한 표준 테스트 방법 요청

더 읽기

ASTM F1140

ASTM F1140 포장용 가압 테스트 견적 요청 표준 요약 ASTM F1140/F1140M-13(2020) 내부 가압 실패에 대한 표준 테스트 방법

더 읽기

ASTM D3078

ASTM D3078 종합 개요 – 가장 많이 사용되는 패키지 누출 테스트 방법 견적 요청 표준 요약 ASTM D3078,

더 읽기

ASTM F2338

ASTM F2338 비파괴 진공 붕괴 누출 시험 방법 견적 요청 표준 요약 ASTM F2338 비파괴 진공 붕괴 누출 시험 방법

더 읽기

ASTM F2096

ASTM F2096 누출 테스트 표준: 버블 누출 테스트 테스트 이론 및 프로세스 개요 ASTM F2096 테스트는 다음을 위해 설계되었습니다.

더 읽기

누출 및 밀봉 강도 테스터

LSST-03 누출 및 밀봉 강도 테스터는 다양한 산업에서 패키지 밀봉 무결성을 엄격하게 평가하도록 설계된 최첨단 장치입니다. 이 장비는 포장이 보호 기능을 유지하는지 확인하는 데 필수적이며, 이를 통해 제품 품질과 안전을 보호합니다. 특히 유연한 포장과 관련된 응용 분야에 적합하지만 사용자 정의 가능한 디자인을 통해 유연하지 않고 단단한 재료를 테스트하는 데도 적용할 수 있습니다.

더 읽기