ASTM F2095

ASTM F2095
Test Methods for Pressure Decay Leak Test for Flexible Packages With and Without Restraining Plates
zatražite ponudu

Introduction to ASTM F2095 and Its Importance

In the packaging industry, maintaining the integrity of flexible packages is essential for product protection and compliance. ASTM F2095 provides a standardized approach to detect leaks in flexible packaging using pressure decay methods. This test ensures that packaging—especially in sectors like food, medical, and pharmaceuticals—meets stringent safety and quality expectations.

Pressure Decay Tester and Its Role in ASTM F2095

A key component of ASTM F2095 is the use of a pressure decay tester. This instrument measures the internal pressure loss in a sealed flexible package over time. A loss of pressure indicates a potential leak in the packaging material or seal. The pressure decay method is valued for its sensitivity and non-destructive nature, making it ideal for high-risk applications such as food packaging leak detection and sterile medical product validation.

The LSST-01 Tester za ispitivanje čvrstoće nepropusnosti i brtve by Stanični instrumenti is specifically designed for these applications. It provides precise pressurization, time-controlled testing, and reliable data recording, aligning perfectly with the procedural requirements of ASTM F2095.

LSST-01 Sustav za ispitivanje nepropusnosti i čvrstoće brtvljenja
ASTM F2095 Pressure Decay Method

Understanding ASTM F2095 Test Methods

Test Method A: Without Restraining Plates

This method is typically used when the package can naturally expand under pressure. It includes the following steps:

  • Pressurize the package to a preset value.
  • Stabilize the internal pressure.
  • Measure pressure decay over a fixed duration.
  • Determine leak presence based on the pressure drop.

This approach is ideal for assessing packaging where internal volume variations can occur, such as flexible food packaging or resealable pouches.

ASTM F2095 Leak Test Method A
LSST-01 Tester za ispitivanje čvrstoće curenja i brtvljenja sa sigurnosnim pločama
ASTM F2095 Leak Test Method B

Test Method B: With Restraining Plates

In scenarios where package expansion must be minimized to maintain consistent volume during testing, rigid restraining plates are used. This method is especially suitable for porous or irregularly shaped packages. The plates ensure that the test measures only pressure decay due to leaks, not due to volume fluctuations.

For both methods, the sample must be properly conditioned to match the testing environment—typically at 23 ± 2°C and 50 ± 5% RH—to avoid pressure fluctuations due to temperature differences.

Apparatus Requirements for ASTM F2095

To ensure compliance with ASTM F2095, your test system should include:

The Cell Instruments LSST-01 meets these requirements and offers user-friendly operation with automated cycles, reducing human error and increasing repeatability.

Applications in Food Packaging Leak Detection

U food packaging leak detection, ensuring seal integrity directly impacts product shelf life and consumer safety. ASTM F2095 enables manufacturers to verify package integrity without destroying the product. The LSST-01 offers critical support in identifying packaging defects before distribution, thus helping brands maintain trust and regulatory compliance.

Furthermore, flexible packaging used in frozen food, ready meals, or modified atmosphere packaging (MAP) greatly benefits from pressure decay testing, as even micro-leaks can compromise quality.

FAQ about ASTM F2095

Flexible packages with or without contents, including food pouches, medical wraps, and pharmaceutical blister packs.

It detects leaks as small as 1 × 10⁻⁴ sccs, depending on the instrument and method used.

No, only if volume consistency is critical or the package is porous. Method A does not use plates; Method B does.

It automates pressurization, stabilization, and pressure decay measurement, ensuring compliance and ease of use.

Yes, especially in quality control for vacuum-sealed or MAP flexible food packaging.

Looking for reliable ASTM F2095 leak detection equipment?

Ne propustite priliku da optimizirate svoje procese kontrole kvalitete uz pomoć najsuvremenije opreme.

Kontaktirajte nas

Povezane informacije

ASTM F2054

ASTM F2054 Standardna ispitna metoda za ispitivanje pucanja fleksibilnih brtvi pakiranja korištenjem unutarnjeg zračnog tlaka unutar sigurnosnih ploča zahtjev

Pročitajte više

ASTM F1140

ASTM F1140 Ispitivanje tlaka za pakiranje Zatražite ponudu Standardni sažetak ASTM F1140/F1140M-13(2020) Standardne metode ispitivanja za kvar unutarnjeg tlaka

Pročitajte više

ASTM D3078

ASTM D3078 Sveobuhvatni pregled – najčešće korištene metode ispitivanja curenja paketa Zatražite ponudu Standardni sažetak ASTM D3078,

Pročitajte više

ASTM F2338

ASTM F2338 Nedestruktivna metoda ispitivanja curenja propadanjem vakuuma zatražite ponudu Standardni sažetak ASTM F2338 Standardna metoda ispitivanja za nedestruktivnu

Pročitajte više

ASTM F2096

ASTM F2096 Standard za ispitivanje nepropusnosti: Ispitivanje mjehurićima propuštanja Teorija ispitivanja i pregled procesa ASTM F2096 ispitivanje je dizajnirano da

Pročitajte više

Ispitivač nepropusnosti i čvrstoće brtve

LSST-03 Tester za propuštanje i čvrstoću brtvljenja vrhunski je uređaj projektiran za rigoroznu procjenu integriteta brtvljenja paketa u raznim industrijama. Ova je oprema ključna za provjeru zadržava li pakiranje svoje zaštitne sposobnosti, čime se čuva kvaliteta i sigurnost proizvoda. Osobito je prikladan za primjene koje uključuju fleksibilno pakiranje, ali je također prilagodljiv za testiranje nesavitljivih i krutih materijala zahvaljujući svom prilagodljivom dizajnu.

Pročitajte više