ASTM F2095

ASTM F2095
Test Methods for Pressure Decay Leak Test for Flexible Packages With and Without Restraining Plates
demander un devis

Introduction to ASTM F2095 and Its Importance

In the packaging industry, maintaining the integrity of flexible packages is essential for product protection and compliance. ASTM F2095 provides a standardized approach to detect leaks in flexible packaging using pressure decay methods. This test ensures that packaging—especially in sectors like food, medical, and pharmaceuticals—meets stringent safety and quality expectations.

Pressure Decay Tester and Its Role in ASTM F2095

A key component of ASTM F2095 is the use of a pressure decay tester. This instrument measures the internal pressure loss in a sealed flexible package over time. A loss of pressure indicates a potential leak in the packaging material or seal. The pressure decay method is valued for its sensitivity and non-destructive nature, making it ideal for high-risk applications such as food packaging leak detection and sterile medical product validation.

Le Testeur de fuite et de résistance d'étanchéité LSST-01 by Instruments cellulaires is specifically designed for these applications. It provides precise pressurization, time-controlled testing, and reliable data recording, aligning perfectly with the procedural requirements of ASTM F2095.

Système de test de fuite et de résistance aux joints LSST-01
ASTM F2095 Pressure Decay Method

Understanding ASTM F2095 Test Methods

Test Method A: Without Restraining Plates

This method is typically used when the package can naturally expand under pressure. It includes the following steps:

  • Pressurize the package to a preset value.
  • Stabilize the internal pressure.
  • Measure pressure decay over a fixed duration.
  • Determine leak presence based on the pressure drop.

This approach is ideal for assessing packaging where internal volume variations can occur, such as flexible food packaging or resealable pouches.

ASTM F2095 Leak Test Method A
Testeur de fuite et de résistance d'étanchéité LSST-01 avec plaques de retenue
ASTM F2095 Leak Test Method B

Test Method B: With Restraining Plates

In scenarios where package expansion must be minimized to maintain consistent volume during testing, rigid restraining plates are used. This method is especially suitable for porous or irregularly shaped packages. The plates ensure that the test measures only pressure decay due to leaks, not due to volume fluctuations.

For both methods, the sample must be properly conditioned to match the testing environment—typically at 23 ± 2°C and 50 ± 5% RH—to avoid pressure fluctuations due to temperature differences.

Apparatus Requirements for ASTM F2095

To ensure compliance with ASTM F2095, your test system should include:

Le Cell Instruments LSST-01 meets these requirements and offers user-friendly operation with automated cycles, reducing human error and increasing repeatability.

Applications in Food Packaging Leak Detection

In food packaging leak detection, ensuring seal integrity directly impacts product shelf life and consumer safety. ASTM F2095 enables manufacturers to verify package integrity without destroying the product. The LSST-01 offers critical support in identifying packaging defects before distribution, thus helping brands maintain trust and regulatory compliance.

Furthermore, flexible packaging used in frozen food, ready meals, or modified atmosphere packaging (MAP) greatly benefits from pressure decay testing, as even micro-leaks can compromise quality.

FAQ about ASTM F2095

Flexible packages with or without contents, including food pouches, medical wraps, and pharmaceutical blister packs.

It detects leaks as small as 1 × 10⁻⁴ sccs, depending on the instrument and method used.

No, only if volume consistency is critical or the package is porous. Method A does not use plates; Method B does.

It automates pressurization, stabilization, and pressure decay measurement, ensuring compliance and ease of use.

Yes, especially in quality control for vacuum-sealed or MAP flexible food packaging.

Looking for reliable ASTM F2095 leak detection equipment?

Ne manquez pas l’occasion d’optimiser vos processus de contrôle qualité avec des équipements de pointe.

Contactez-nous

Informations connexes

ASTM F2054

Demande de méthode d'essai standard ASTM F2054 pour les essais d'éclatement des joints d'emballage flexibles utilisant une pressurisation d'air interne dans des plaques de retenue

En savoir plus

ASTM F1140

Essais de pressurisation ASTM F1140 pour les emballages Demander un devis Résumé de la norme ASTM F1140/F1140M-13(2020) Méthodes d'essai standard pour la défaillance de la pressurisation interne

En savoir plus

ASTM D3078

ASTM D3078 Aperçu complet de – La méthode de test d'étanchéité des emballages la plus utilisée Demander un devis Résumé de la norme ASTM D3078,

En savoir plus

ASTM F2338

ASTM F2338 Méthode d'essai d'étanchéité par décroissance du vide non destructive demander un devis Résumé de la norme ASTM F2338 Méthode d'essai standard pour les fuites non destructives

En savoir plus

Norme ASTM F2096

Norme de test d'étanchéité ASTM F2096 : Test d'étanchéité à bulles Présentation de la théorie et du processus de test Le test ASTM F2096 est conçu pour

En savoir plus

Testeur de fuite et de résistance d'étanchéité

Le testeur d'étanchéité et de résistance des joints LSST-03 est un appareil de pointe conçu pour une évaluation rigoureuse de l'intégrité des joints d'emballage dans divers secteurs. Cet équipement est essentiel pour vérifier que l'emballage conserve ses capacités de protection, préservant ainsi la qualité et la sécurité du produit. Il est particulièrement adapté aux applications impliquant des emballages flexibles, mais il est également adaptable pour tester des matériaux non flexibles et rigides grâce à sa conception personnalisable.

En savoir plus