ASTM F2095

ASTM F2095
Test Methods for Pressure Decay Leak Test for Flexible Packages With and Without Restraining Plates
поискайте оферта

Introduction to ASTM F2095 and Its Importance

In the packaging industry, maintaining the integrity of flexible packages is essential for product protection and compliance. ASTM F2095 provides a standardized approach to detect leaks in flexible packaging using pressure decay methods. This test ensures that packaging—especially in sectors like food, medical, and pharmaceuticals—meets stringent safety and quality expectations.

Pressure Decay Tester and Its Role in ASTM F2095

A key component of ASTM F2095 is the use of a pressure decay tester. This instrument measures the internal pressure loss in a sealed flexible package over time. A loss of pressure indicates a potential leak in the packaging material or seal. The pressure decay method is valued for its sensitivity and non-destructive nature, making it ideal for high-risk applications such as food packaging leak detection and sterile medical product validation.

The LSST-01 Тестер за течове и якост на уплътнение by Клетъчни инструменти is specifically designed for these applications. It provides precise pressurization, time-controlled testing, and reliable data recording, aligning perfectly with the procedural requirements of ASTM F2095.

LSST-01 Система за тестване на течове и якост на уплътнение
ASTM F2095 Pressure Decay Method

Understanding ASTM F2095 Test Methods

Test Method A: Without Restraining Plates

This method is typically used when the package can naturally expand under pressure. It includes the following steps:

  • Pressurize the package to a preset value.
  • Stabilize the internal pressure.
  • Measure pressure decay over a fixed duration.
  • Determine leak presence based on the pressure drop.

This approach is ideal for assessing packaging where internal volume variations can occur, such as flexible food packaging or resealable pouches.

ASTM F2095 Leak Test Method A
LSST-01 Тестер за течове и якост на уплътнение с ограничителни пластини
ASTM F2095 Leak Test Method B

Test Method B: With Restraining Plates

In scenarios where package expansion must be minimized to maintain consistent volume during testing, rigid restraining plates are used. This method is especially suitable for porous or irregularly shaped packages. The plates ensure that the test measures only pressure decay due to leaks, not due to volume fluctuations.

For both methods, the sample must be properly conditioned to match the testing environment—typically at 23 ± 2°C and 50 ± 5% RH—to avoid pressure fluctuations due to temperature differences.

Apparatus Requirements for ASTM F2095

To ensure compliance with ASTM F2095, your test system should include:

The Cell Instruments LSST-01 meets these requirements and offers user-friendly operation with automated cycles, reducing human error and increasing repeatability.

Applications in Food Packaging Leak Detection

In food packaging leak detection, ensuring seal integrity directly impacts product shelf life and consumer safety. ASTM F2095 enables manufacturers to verify package integrity without destroying the product. The LSST-01 offers critical support in identifying packaging defects before distribution, thus helping brands maintain trust and regulatory compliance.

Furthermore, flexible packaging used in frozen food, ready meals, or modified atmosphere packaging (MAP) greatly benefits from pressure decay testing, as even micro-leaks can compromise quality.

FAQ about ASTM F2095

Flexible packages with or without contents, including food pouches, medical wraps, and pharmaceutical blister packs.

It detects leaks as small as 1 × 10⁻⁴ sccs, depending on the instrument and method used.

No, only if volume consistency is critical or the package is porous. Method A does not use plates; Method B does.

It automates pressurization, stabilization, and pressure decay measurement, ensuring compliance and ease of use.

Yes, especially in quality control for vacuum-sealed or MAP flexible food packaging.

Looking for reliable ASTM F2095 leak detection equipment?

Не пропускайте възможността да оптимизирате вашите процеси за контрол на качеството с най-съвременно оборудване.

Свържете се с нас

Свързана информация

ASTM F2054

ASTM F2054 Стандартен метод за изпитване за изпитване на спукване на гъвкави уплътнения на опаковки с използване на вътрешно въздушно налягане в ограничителни плочи

Прочетете повече

ASTM F1140

ASTM F1140 Тестове за херметизация за опаковки Поискайте оферта Резюме на стандарта ASTM F1140/F1140M-13(2020) Стандартни методи за изпитване за повреда на вътрешното херметизиране

Прочетете повече

ASTM D3078

ASTM D3078 Изчерпателен преглед на – най-използвания метод за изпитване за течове на опаковката Поискайте оферта Стандартно резюме ASTM D3078,

Прочетете повече

ASTM F2338

ASTM F2338 Non-Destructive Vacuum Decay Test Method за течове поискайте оферта Резюме на стандарта ASTM F2338 Standard Test Method for Nondestructive

Прочетете повече

ASTM F2096

ASTM F2096 Стандарт за изпитване на течове: Тест за мехурчести течове Теория и преглед на процеса Тестът ASTM F2096 е предназначен за

Прочетете повече

Тестер за течове и якост на уплътнение

Тестерът за теч и якост на уплътнение LSST-03 е устройство от последно поколение, проектирано за строга оценка на целостта на уплътнението на опаковката в различни индустрии. Това оборудване е от решаващо значение за проверката дали опаковката поддържа своите защитни способности, като по този начин се гарантира качеството и безопасността на продукта. Той е особено подходящ за приложения, включващи гъвкави опаковки, но също така е адаптивен за тестване на негъвкави и твърди материали чрез персонализиращия си дизайн.

Прочетете повече